Optical Fiber Section Analyzer (CS-RIP-100)
Get Instant QuoteProduct Details
Introduction :
It is used to test the refractive index distribution of any fiber type. it can provide a
three-dimensional distributed refractive index distribution along the fiber axis, assisting in NA
calculations. In addition, it can also measure the geometric parameters of fiber, as well as the
qain section of rare-earth doped fiber.CS-RIP-100 can be used to analyze microinstruction optical
fiber, optical fiber beam combiner, high power active optical fiber. To help customer study optical
fiber preparation process, fused biconical taper process, and splicing process.
Parameter :
| Parameter | Typical value |
| Refractive index accuracy | ±0.0001 |
| Spatial resolution | Better 500nm |
| Measurement wavelength | Typical value 632nm (wavelength customization) |
| Optical Fiber diameter | 40μm~800μm |
| Optical Fiber material | Quartz,plastic and other transparent material |
| Optical fiber type | Single/multi-mode, large mode area,rare-earth doped fiber, CladdingPumped,microstructure fiber,Polarization-Maintaining fiber, and etc |
| Concentricity error measurement | ±200nm |
| Cladding non-circularity error measurement | ≤0.5% |
| Core non-circularity error measurement | ≤3% |
| Test time | ≤3min(360 Angle accurate measurement) |
| Test method | Full automatic, non-destructive measurementProduct dimensions |
Product dimensions：
Testing photography
Splicing analysis
Yb ion relative concentration
Test pictures
Refractive index section
2D mode section reconstruction
