GLE series MOPA Laser Source adopts a cost-effective all-fiber structure. Through special pulse modulation technology, it outputs pulsed laser with high beam quality, optimizes the output waveform without fear of high reflection.Its switching light response is fast, compression structure volume with better performance.Widely used in deep carving, marking, cutting, punching and other applications.
35W/50W/60W/100W/200W
Optical characteristics
| N | Characteristics | Parameter value | Unit |
| 1 | Center wavelength | 1060-1080 | nm |
| 2 | Spectral width(FWHM) | < 15 | nm |
| 3 | Maximum pulse energy | 1.2 | mJ |
| 4 | Output Power | 50±2.5 | W |
| 5 | Power adjustment range | 0-100 | % |
| 6 | Frequency adjustment range | 1-100 | kHz |
| 7 | On/off light response time | < 50 | μs |
| 8 | Pulse Width | 200 | ns |
| 9 | Output power stability | < 5 | % |
| 10 | Beam quality M² | < 1.8 | / |
| 11 | Polarization direction | Random | / |
| 12 | Resist high reaction | Yes | / |
| 13 | Indication (red) optical power | 0.3-2 | mW |
| 14 | Collimated Beam diameter (4σ) | | mm |
| 15 | Delivery cable length | 3 | m |
Electrical characteristics
| N | Characteristics | Parameter value | Unit |
| 16 | Supply voltage | 24 | V |
| 17 | Working current | < 9 | A |
| 18 | Power consumption | <216 | W |
| 19 | Recommended power supply | ≥350 | W |
Environmental requirements
| N | Characteristics | Parameter value | Unit |
| 20 | Working temperature | 0-40 | ℃ |
| 21 | Storage temperature | -10-60 | ℃ |
| 22 | Cooling Method | Air cooling | / |
Structural characteristics
| N | Characteristics | Parameter value | Unit |
| 23 | Laser dimension | 316.7.5*260.2*80.2 | mm³ |
| 24 | Isolator size | 200*42*42 | mm³ |
| 25 | Net weight | <8 | kg |
